Rubicon Models - M40 105mm Recoilless Rifle

The M40 recoilless rifle is a portable, crew-served 105 mm recoilless rifle made in the United States. Intended primarily as an anti-tank weapon, it could also be employed in an antipersonnel role with the use of an antipersonnel-tracer flechette round. The bore was commonly described as being 106 mm caliber but is in fact 105 mm; the 106 mm designation was intended to prevent confusion with incompatible 105 mm ammunition from the failed M27. The air-cooled, breech-loaded, single-shot rifle fired fixed ammunition and was used primarily from a wheeled ground mount. It was designed for direct firing only, and sighting equipment for this purpose was furnished with each weapon, including an affixed spotting rifle.

Replacing the M27 recoilless rifle, the M40 primarily saw action during the Vietnam War and was widely used during various conflicts thereafter in Africa or in the Middle East. It was replaced by the BGM-71 TOW anti-tank missile system in the US Armed Forces.

The M40 is shaped like a long tube with an M8C .50 cal spotting rifle above. The spotting rifle fires a round whose trajectory closely matches that of the 105 mm round and gives off a puff of smoke on impact with the target. On the left side, there is an elevating wheel, in the center of which is the trigger wheel used to fine adjust the elevation and at the same time firing the spotting rifle when pulled, and the gun when pushed. The mounting is a M79 “wheelbarrow” tripod; the front leg has a castering wheel. On top of the mount is a traverse wheel. On the center of the traverse wheel is a locking wheel, when the wheel is down, the rifle is locked in traverse, and can only be moved right and left with the traverse wheel. When the wheel is raised, the rifle can be traversed by hand.

The whole mounting can be placed on an M151 Jeep for mobile use and can also be mounted on M274 “Mule” and M113 APC as well. A special vehicle called the M50 Ontos carried six M40s (a version specific to the T195E5 mount, the M40A1C, was used) and was used only by the US Marine Corps. The M40 remains in widespread use in Asia, Africa, the Middle East and South America. With the introduction of anti-tank missiles the M40 is often relegated to a secondary role and nowadays is mostly used as a support weapon for infantry operations.

Product Highlights:
- Can be mounted on the M274 and M113
- Breech in firing or loading mode
- Spare ammunition included
- 4 weapon crew included

Plastic kit, supplied unassembled and unpainted.

The PT-76 was used as the standard reconnaissance tank of the Soviet Union and Warsaw Pact armies. It was also intended for water obstacle fording operations and naval infantry landings. It served in the reconnaissance subunits of tank divisions and mechanized divisions of the Red Army and Soviet marines divisions. Although it has been replaced in front line service by the BMP-1, it may still be found in the reconnaissance companies and battalions of some motorized rifle and tank regiments and divisions, as well as in naval infantry units. Aside from its reconnaissance role, it is also used for crossing water obstacles in the first wave of an attack and for artillery support during the establishment of a beachhead. The PT-76 is still on active service in a number of countries mainly in the developing world.

Product Highlights:
- Option to build either a PT-76 or PT-76B with waterline option
- Choice of two muzzle brakes & optional DShK 1938 HMG
- Open or closed crew hatches & rear hydro jet outlet lids
- Trim board in extended or stowed position
- Highly detailed track links
- Tank crew included

Plastic kit, supplied unassembled and unpainted.